Forum quick links
Preferred parking outside the LEED boundary
CS-2009 SSc4.3:Alternative transportation - low-emitting and fuel-efficient vehiclesposted by Gabriela Hernández Castillo on
Our project's parking goes beyond the LEED boundary, since it is a mixed used building with several towers and only one of them will apply for LEED certification.
have 44" to 68" perimeter glazing at a library
NC-2009 IEQc8.2:Daylight and views - viewsposted by Joseph Bace on
For only 2" above the 42" sight line requirement do you think a special circumstance is viable for LEED to possibly award the credit or is it better to do the calculations for the standing occupant
DOAS for baseline model
NC-2009 EAp2:Minimum energy performanceposted by Katherine Ann Resurreccion on
If the proposed HVAC design has DOAS that delivers OA to all AHU's, should there be the same auto-sized capacity but the same air flow DOAS for the baseline?
New addenda
posted by Emil Andersson on
April 2012 addenda issued for LEED HC: http://www.usgbc.org/DisplayPage.aspx?CMSPageID=2200#BD+C
Leveling Compounds
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Bruce Maine on
Has anyone experienced reviewers comments on Leveling Compounds or is the application more geared towards flooring systems?
Qualifies for SSc7.1 and SSc7.2--Double Dipping?
NC-2009 SSc7.2:Heat island effect - roofposted by Brooks Critchfield on
The grade at our project drops considerably, allowing for conditioned space below a green roof and paved areas.
Exhaust air energy recovery in the baseline
CS-2009 EAp2:Minimum energy performanceposted by Michela Tedeschi on
Hello all, my question is: when do i have to consider the exhaust air energy recovery in the baseline building’s AHU? The 90.1 User’s manual reports that exhaust air Energy recovery is required for
Simulation Clarification
NC-2009 IEQc8.1:Daylight and views - daylightposted by Rebekah Burke on
We are being challenged by the modification to IEQc8.1 Option 1 Simulation from May 9th, 2011, which replaced the entire section.
Labs21 Benchmarking Tool
EBOM-2009 EAp2:Minimum energy efficiency performanceposted by Guilherme Ramos on
Does anybody know what's LEED position about laboratories benchmarking using this tool? I'm working on a lab certification project (EBOM) and since our lab ratio is more than 10% of our gross area,