As part of a fit out I the only tenant AHU is for make up air in a Kitchen 2966.4 CFM Can anyone explain the approach to enter this is in LEED form.

The proposed building is a dormitory served using individual fan coils (with no outside air in the fan coils) and the outside air for the building being supplied by a single dedicated outside air u

I am working on a project with commercial food service equipment. The equipment includes a few custom walk-in freezers and coolers.

I'm working on a very suburban site and was wondering if I can include a hotel as part of the minimum 10 unit per acre requirement?

Hello, a question concerning IEQc8.1 & IEQc8.2 . Can we use the net floor area instead of gross floor area for the simulation in Matrix_Table IEQ-1 Daylight and views? I would like to use t

I have a scenario where the core is offset, and is tight to the building envelope on one side. As a result, the egress path around the core on this side falls within the 15' perimeter.

Hi, I am working with a project that is beneath a municipal park.

Hi, is the oriented strand board - osb considered as rapidly renewable?

We are designing a research and development facility for an equipment manufacturer and trying to pursue LEED certification for the facility.

Hello All, We have a 140,000 SF shell & Core project that is mixed use 1st floor and office space floors 2-6. We are using LEED 2009 C&S.