Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Treating CUP as a DES?

General forums
posted by  Irina Foster  on 

Hi, I am working on a LEED Healthcare project. The hospital building is phase 1 of a number of phases within a large master plan area.

3
Mon Dec 24, 2012, 6:53 pm

Commissioning Walk-in Freezers / Coolers

NC-2009 EAp1:Fundamental Commissioning of Building Energy Systems
posted by  Richard Woodward  on 

We have a mixed use new office / commercial kitchen project with owner occupiers.

3
Fri Dec 21, 2012, 7:45 pm

Calculating Vot in Credit Template

CI-2009 IEQp1:Minimum IAQ Performance
posted by  Rick Servoss  on 

The Template calculates Vot by dividing Voz by Ev. ASHRAE 62.1 2007 arrives at Vot by dividing Vou by Ev, not Voz.

2
Default Avatar
Mechanical Engineer
LEEDuser Basic Member
23 thumbs up
Fri Dec 21, 2012, 6:54 pm

M&V Plan - Specific Acceptable Range(s) of Error

CS-2009 EAc5.1:Measurement and Verification—Base Building
posted by  Marina Andrade  on 

Hello, I just got the review comment requesting the “specific acceptable range(s) of error”, follow the comment bellow. “TECHNICAL ADVICE: Please revise the Measurement and Verification Plan, as

2
Default Avatar
Principal
G. F. Shymko & Associates Inc.
LEEDuser Basic Member
97 thumbs up
Fri Dec 21, 2012, 11:40 am

Design and Build Contract

LEED Reviews: Appeals, Design/Construction Submittals, and more
posted by  Ameet AA  on 

I am working on multiple building campus level projects which fall under same contract and same owner.

10
Senior Sustainable Design Consultant
Arup
LEEDuser Basic Member
2 thumbs up
Fri Dec 21, 2012, 11:02 am

Audits Around the World

EBOM-2009 EAc2.1:Existing Building Commissioning—Investigation and Analysis
posted by  Jenny Carney  on 

All, I'm trying to compile a list of energy audit providers outside of the US.

4
Default Avatar
Owner / Energy Engineer / Sustainability Consultant
Sustainnovations, LLC
LEEDuser Basic Member
94 thumbs up
Fri Dec 21, 2012, 12:08 am
5
Thu Dec 20, 2012, 11:14 pm

Air cooled chillers and other air cooled equipment.

NC-2009 EAp2:Minimum Energy Performance
posted by  Rudolph Carneiro  on 

Question: If I have an air cooled chiller selected at non-ARI conditions that has a full load efficiency of 3.0 COP, does it comply with the minimum efficiency requirement of 2.8 COP from ASHRAE -

3
Thu Dec 20, 2012, 9:01 pm
6
Default Avatar
Senior ESD Consultant
LEEDuser Basic Member
62 thumbs up
Thu Dec 20, 2012, 8:53 pm

Innovation points no longer recognized?

NC-2009 IDc1:Innovation in Design
posted by  Kris Phillips  on 

I have conflicting information on a few Innovation points that have been achieved on certain projects, but are apparently being denied on current projects being deemed "too easy" by the GBCI review

5
Default Avatar
Sustainable Building Services Project Manager
Architectural Energy Corporation
LEEDuser Basic Member
6 thumbs up
Thu Dec 20, 2012, 4:58 pm