I'm using Revised Section 1.4 Tables (October 2012). I notice for Nontradable Surfaces "Total allowance calculated using the lesser of the design lighting power, or the lighting power allowance...

Hi there, need help for energy simulation.

We have a workshop consists of two air conditioned workshops/labs that require 7ach and Relative humidity to be maintained at 50+/-10%.
To...

We received the following review comments during our design review and my question is, where do I find the Uvalue for the frame & glass...

62.1 has an exahust requirement for mechanically ventilated Parking garages (Table 6-4), with an exception C - no ventilation required if two or more sides comprise walls that are at least 50%...

We have a narrow plan 3 storey naturally ventilated building with radiators (baseboard) in temperate Ireland. Some windows are user controlled and some controlled by the BMS, with night purge...

Hi,

I'm working on the certification of a storage and distribution center that will have an electric forklift truck as part of its operations. Do we have to include the forklift truck in...

The project is registered as a LEED NC v 2009. A good portion of the building project is going to be used for living quarters. Can ASHRAE 62.2 be utilized for the Outside Air Calculation???...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up November 27, 2013- 3:36 pm I am monitoring the v4 forums and tried to help you there. I don't know the answer per se but you should be able to find it in the AHRI 1230 standard. I put a link to the free download in my reply. Log in or register to post comments ...

I had a mini-heart attack until I realised my ceiling mounted LED light has indeed two faces and is visible towards two directions (30 m), because the data sheet indicated a connected load of...

I have two questions regarding exterior lighting and treatment of the LEED boundary in EAp2.

1. If the LEED boundary excludes exterior lights that were installed as part of the project,...