Greetings,
There is an issue on applying F factor about which I'd appreciate some assistance.
The F factor in general refers to the floor slab edge insulation. Its value depends also...

Hello,

On our project we are getting supplied from local contractors materials like sandstone, granite, reused teak...

From what I have read about the new website, it is no longer required to complete all design prerequisites before submitting for Design Review (split review assumed).

We have been hung...

Hello,
Appendix G Table G.3.1 - Service Hot water systems states "The service hot-water system in the baseline building design shall use the same energy source as the corresponding...

We are modeling a new building in a previously developed site, with some remains of the previous building.
One of the project strategies is to step aside the building façade (2 m, approx)...

Is Table 10.8 mandatory for plug fans of new buildings? The fans are installed in Air Handling Units. If they are mandatory, are they mandatory both for supply fans and for return fans?

Hello, My name is Ricardo from Mexico City. We have a Project that include Hotel, Residential Building and Retail.

On the case of Residential Building in Mexico City we dont install HVAC...

Shall the person who enters his/her initials under signatory section ( for example EAp2-1, 2-2, 2-3 ) be registered mechanical engineer (PE) ? If so, can you please let me know where this...

Greetings,
There is a clarification issue while entering these values in the Baseline about which I'd appreciate some advice.
The OA flow should be identical in both models. When...

The project is a medium sized workshop shed and will be mechanically ventilated with fans with a particular air change per hour as per the local standards. The client wants this to be LEED...