Hi all,

We are using EnergyPro v6 for our LEED modeling. Per the ...

Hi All,

My question is basically about how much can you decrease the baseline capacities without going to far - that might call Red flags.

For example I have a baseline model that...

Hi LEED experts,

In proposed model, I use design schedule to input Fan power (614 kW) into model software (HAP). All fans are VSD and they supply fresh air to multiple zone through VAVs....

Hi,

I need a couple of clarificaitons regarding the Outdoor Airflow that has to be listed in Table 1.4.7.B of the proposed systems. The project is located in California.

The helpful...

Hi,

I am doing the Energy Model for G+5 Floors Office building. The total conditioned area is 90,500 Sq ft. The project is connected with District Cooling Plant and have opted the option 1...

Owner wanted all fume hoods operating with 100cfm 24:7. After preliminary energy modelling with 60 cfm during working hours and 30 cfm after hours, we reduce air changes, fan energy and with...

In this project, we have one office, two plants signed up for LEED Campus. Cooling & Heating for these plant buildings comes from Chillers & Boilers located in centrally located plant in...

I have a project were there is a 24,000 Btuh gas vented fireplace. Is a wall device mostly radiant heater (70-75%) with a glass panel which does not have a fan. All combustion air is taken from...

There is Car Driving Test Ground located outside the building, which takes power from the substation inside the building. This ground is closely resemblance of a space like car racing (i.e....

I'm hoping someone can help me determine the appropriate Baseline system for a Vehicle Maintenance Facility for a LEED v2009 project. The total project area is about 34,500 s.f. however 28,000 s....