The project is a railcar vehicle maintenance facility (VMF) a couple acres large. This project falls under new construction and includes a new rail track to be brought into the VMF. I am unsure...

I have a small facility (20k sqft or so) that is approximately 45% office and 55% "transitional" residential.
I've modeled it as a residential with PTAC w/ HW Coil per zone, but I'm running...

Hello,

I would just like to ask regarding how I should model the ventilation system of my baseline model. My project is a hotel building which uses chilled water as its main cooling medium...

Hi,
We at climate zone 1, and in normal practices, we use solar water heating storage tank for shower. In ASHRAE 90.1 , table 7.8, which categories of equipment performance we need to...

The project is a 67000 sqft, six floored building. There are rooms with high equipment loads of greater than 20W/sft . The total area of these type of rooms adds up to 14,000 sqft. These high...

To comply with the mandatory sections 6.4.3.4 “Stair and Shaft Vents” and 6.4.3.4.2 “Gravity Hoods, Vents and Ventilators”, according to the climate zone 2, the standard requires that gravity...

We are assisting a design-build team in Japan with getting their project to be LEED Silver certified. To meet this prerequisite, is it absolutely required to follow ASHRAE 90.1-2007? The project...

Dear LEEDuser,
Could we please have a sample summary report for this upload?
Kind regards,
Jean

Regarding what is taken as a...

I'm trying to model a...