The project has a pre-rinse valve with a flow rate of 1.27gallons per minute. How do I estimate daily uses and duration?

Thanks!

If our project has three different kitchen sinks with varying flow rates (ie SK-1: 1.0GPM, SK-2: 1.5GPM etc), how do I enter the usage for the...

We installed low flow toilets throughout our newly constructed 1.3 million square foot building and now experience line clogging issues. We still believe the installation of the fixtures was the...

Our reviewer has noted in the technical advice that "for projects registered after Feb 2, 2011, a 30 second duration is required for lavatory faucets." We have used either 15 seconds, or 12...

I've seen several versions of this question posted, none of which appears to have been answered, so I'll ask it again.

What version of the water use redcuction additional guidance should...

Hi every one:

I am working in a project in Chile, it is a Foodmarket located within a Mall which is also pursuing LEED Certification. This Foodmarket considers Ice Machines and other...

Our project is a university dining hall. The client wishes to use an "automated" handwash system (this one here www.meritech.com/products...

Is there any standard for how many uses/day a commercial prerinse spray valve should have? The owner expects to be serving about 5,000 meals per day in this university dining hall. thanks.

I am sure this has been answered elsewhere in this listing but I am confused by the back and forth about auto-shutoff faucets, the most common commercial lavatory faucet in much of the work I am...

Review comments have requested that I include the pre-rinse spray valve in the hotel kitchen in my water usage calculations. However, I do not see a category for this fixture type in the Fixture...