Dear Kudos, 

We have been consistently receiving comments across multiple project reviews regarding worst-case considerations. I have shared my assumptions on this topic, but I'd...

We have a LEED v4 ID+C for Retail project that has two water-source heat pumps (WSHP). One of these WSHPs has an OA CFM below 1000, so it is not required to have a monitoring device. However, the...

I'm wondering if my understanding of the ID+C reference manual (pg 311) is correct: no airflow monitoring equipment is needed if the ventilation system isn't in the scope of work? Has anyone...

Hi,

We cannot get any information from the...

One of my LEED v4 ID+C project getting below comments from LEED reviewer for Minimum Indoor Air Quality Performance Calculator (Project having...

We have a 100% outside air HVAC with an energy recovery wheel serving the entire the project space.  Since there is no recirculating air getting reintroduced to the supply side, the MEP engineer...

Hi users,
One of office project having printing spaces in open office. It is in the name of repro. As per LEED Requirement, whether this space should be negatively pressurised or not....

I'm working on an ID+C project located in Mexico City. 

The owner wants to implement natural ventilation to save energy. 

The main challenge is the outdoor air pollutants. Mexico...

""It appears that the Ventilation Rate Procedure (VRP) calculations may not have been performed for the worst-case conditions, as it is not clear if the cooling condition calculations analyze the...

Hello, we are dealing with the interior project of a beauty shop.

Some of the space in the project is ventilated with an Energy Recovery Unit and an Exhaust Fan.

ERU did not meet...