Our building did divert 50% of ongoing consumables during out last LEED EBOM certification in 2010. We did perform a waste audit at that time so we acquired MRc6.

I have a factory to be built for rent. Thus, this project goes for CS since we only build the shell.

My project has a dayligh dimming system and alos the curtain of each window. The reviewer ask me to add the effect of how this curtain will be modeled.

When reusing an existing building (major renovation) then only new flooring materials would be applicable for the credit?

How should we model the air curtain at the building entrance? Should we model as process load for both baseline and proposed?

What is the documented proof required to be submitted to USGBC confirming on the Occupancy considered for our project.

How should I select the column "Space Usage Type" for each space. My criteria is to assign the type of space which each particular room serves.

This may be a very simple question, and perhaps our team is looking into this too deeply: We have a campus which we intend to use a Master Site with individual registrations (i.e. not a group).

We are working in a project that has a gas-fired boiler that supplies hot water for space heating (radiant floor) and domestic hot water. Do we need to comply with efficiencies in tables 6.8.1F an

If part of the building area passes at 9am but does not pass at 3pm does that mean we cant use that 9am area for that time.