I have a project with a Project Development Density = 298,419 Sf/acre and after the calculations the Average Neighborhood Development Density = 249,458 Sf/acres. I want to pursue the exemplary perf

Regarding this requirement: "Track and document the results of the occupant engagement initiative(s) against the established performance goals and identify areas for improvement." Which performance

Our project includes a large location that was disturbed and altered for use as a borrow pit during the construction of a nearby interstate highway.

LEED 2009, would consider 10% of dwelling units or 4 (refer to SLLc4 equation 2) bicycle storage for visitors. LEED v4 requires short-term bicycle storage for at least 2.5% peak visitors.

According to ASHRAE 90.1 (section 6.4.3.3.4), all HVAC systems serving zones that are intended to operate or be occupied non simultaneously, shall be divided into isolation areas and equipped with

According to ASHRAE 90.1 (section 6.4.3.3.1), all HVAC systems shall be equipped with a control systems that turns the HVAC off on a time basis (timeclock control) or when the spaces are not in use

Hello, This question has 2 parts. 1). Our project would like to submit LEEDV4 Fundamental and Enhanced Cx for Envelope only as ID points in a project registered for LEED 2009.

I am running into a conundrum for a CS warehouse that will have no HVAC systems installed upon completion of the CS project. The only energy savings to document are for the envelope and lights.

I need to know if an anti-corrosive paint it's applicable to this credit and if it is, In what category should I rate this product? What is the rule that sets the VOC's limit content?

We have a new plant using NGV as a fuel to fry potato chip in Thailand.