I am modelling for LEED GROUP - v4 BD+C: CS. Project has 40 Office buildings shared with same basement and served with multiple Water Cooled Chillers as cooling source.

For LEED Group...

Can LEED V.4 C&S projects use the same Alternative Compliance Path (ACP) provisioned for LEED V.3 C&S projects as outlined in the link below?

...

hi all,
we are doing a feasibility study on a CS major renovation project located in South Italy. HVAC (that was substituted 7 years ago) and envelope (that do not need to be upgraded)...

Hi!,
I have one doubt with this rating system and how it applies to my case.
We want to certify a logistic centre, we choose this rating system because the interior fitting and the...

Hello all,

We have a C&S office project where the owner prepares technical infrastructure for VRF heating cooling system in tenant area. All tenants are obligated to use VRF system...

Hi Marcus,
For previous warehouse CS projects with little to no installed mechanical and electrical systems (typically freeze protection, a few ventilation fans, and exterior lighting) we...

Hi All,

I am trying to establish if a project can take benefit in the energy model for an improved air...

Hi,

We have a LEED v4 project (office building) were the project team want to use the CEN option for IEQp1 (using EN 15251 instead of ASHRAE 62.1).

Also, for the energy modeling,...

I'm currently working in a project of a shopping centre (common areas + tenant areas) pursuing LEED certification (Core&Shell).

This shopping center mall is an open-mall type (i.e.,...

According to LEEDv4 reference guide, tenants' lighting system must be modeled identically in the proposed building and in the baseline, as specified by Appendix G (unless energy savings are being...