Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up November 5, 2018- 3:12 pm Not sure. You might be better off posting in the eQUEST users forum at onebuilding.org Log in or register to post comments ...

Hello!

I'm having some doubts regarding how to model the baseline (BB) building.

When modelling a baseline system (system #5 -...

I wanted to understand what is the ballpark for the fan energy consumption for the ASHRAE 90.1 Baseline model for LEED v4. 

Is this number about 10% of the total energy consumption for the...

I have a building composed of two parts: a warehouse and an office. Office is served only by district heating and cooling while warehouse is served both by des and by a stand alone heat pump unit...

At issue, our proposed system (chilled water) is paired against a System 5 (non-residental < 5 floors & 25,000 < SQFT < 150,000) but we are having a problem with the energy modeling...

I'm working on certification for a higher education building.  We've done many LEED certified buildings on campus under previous versions, but this is our first v4 project.  As I understand,...

Hi,

Is anyone here aware about LI 10480 requirements?

Appreciate sharing information please.

thanks,

Susan

Please I am looking for the air cooled chiller minimum full load efficiency COP according to LEED. 

Hi there,

I've got a 24 floor office building to model. The floors have 4 different envelope designs and on each level of the building there are at least 7 different zones (after combining...

Greetings,

The project we are modeling is located in climate zone 6. The proposed case has decided to use “cool roof: with...