Dear Concern:-

we have industrial manufacturing with office building we have applied LEED V4 NC certification 

we don't have any Lighting controls in our project but our...

Dear concern

We are working in a huge industrial project without any lighting controls such as dimming control , Occupancy sensor and time relay

Our clarifications are

1....

Hi Guys, 

I am working on an office building that has been designed with one of its floors to be empty and unused for the foreseeable future. Does anyone know if this floor is required by...

Helo al!

We are evaluating the LEED certification potential of a new winery that will be built in Portugal (using the rating system LEED BD+C v4: New Construction and Major Renovation)....

Hello,

We're working on a project that uses chilled water to cool water tanks as part of an industrial process. The supplied chilled water comes from a chiller that also produces cool...

Dear All,

We are working on a hospital project outside USA where we have air cooled chiller because the region has shortage of water. We are losing big time in energy consumption as water...

Hello,

I am modeling a 40-story residential building located in Miami and I am following the Energy star “Multifamily high rise program, Version 1.0, Revision 03” simulation guidelines....

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up February 13, 2019- 10:26 am As you indicate most software can't model two systems in one zone. So this would likely be very software specific. I'd suggest this part of the question is better served on one of the software specific forums at onebuilding.org. If you are trying to find out which software can do this I would think that EnergyPlus is the most likely. The DOAS with FC is a common system type that most software has a methodology for modeling. It again varies by software as some can model...

Hello,

I'm working on a office building which is served by water cooled VRF and the ground floor consists of...

comments Nicolas Martinez Ochoa Energy Consultant SIMGEA LEEDuser Basic Member 5 thumbs up February 12, 2019- 11:33 am Thank you Marcus. Could you help me with this other question I posted in this forum? It is also related to this project. https://leeduser.buildinggreen.com/forum/oa-baseline-model-residential-b... Log in or register to post comments ...