Forum quick links
Energy model pump baseline for ultra tall buildings
CI-v4 EAp2:Minimum energy performanceposted by Samantha Allen on
Has anyone run up against issues in energy modelling for spaces in ultra tall buildings? LEED baseline in IES 6x lower than the actual for the building.
MERV 14 and WELL
Pilot-Credits INpc155:Design for Indoor Air Quality and Infection Controlposted by Chris Osterhoudt on
For projects pursuing WELL certification in tandem with LEED, MERV filtration requirements are already being met, and ventilation strategies are outlines in the Sequence of Operations as part of th
Strategy for Project surrounded by Active Non-LEED Construction & Dirt Roads
NC-v4 SSp1:Construction activity pollution preventionposted by A&L SUSTENTABILIDADE on
I am looking for advice on best strategy to comply with this prerequisite, since it's a unique site condition.
Thermally Fused Laminate Panels
NC-v4.1 EQc2:Low-Emitting Materialsposted by Allen Cornett on
With the addition of a fourth bullet under Formaldehyde Emissions: The VOC emissions evaluation documentation for any finish or treatment applied off-site (if applicable), does the melamine on Ther
Legal Wood - Pilot Credit LEEDv4
NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materialsposted by Sophie Kerr on
If I have SFI products that make up 100% of my wood products, 25+% of my total materials, and have I completed the survey, have I met the pilot credit?
Required documentation for submission
Pilot-Credits WEpc115:Whole Project Water Use Reductionposted by POLYMNIA GKEKA on
Hello.
Recommendations for developing a standard green lease
Pilot-Credits EApc159:Green Leases ACPposted by Sofia Z on
Hello, our projects aim to develop a standard green lease to comply with Path 1 of the ACP.
Clarification on Design Supply Air Temperature for Baseline model with both heating and cooling
NC-v4 EAc2:Optimize energy performanceposted by Anurag Ghosh on
Hello Everyone,
Baseline Pumping Power
NC-2009 EAp2:Minimum Energy Performanceposted by Ahmed Labeeb on
Based on ASHRAE 90.1, the chilled water pumping power must be 22 W/gpm and does not mention the effect of pumps' head.
proposed energy savings for unfinished spaces based on local energy code?
CS-v4 EAp2:Minimum energy performanceposted by Erin Holdenried on
Nowadays, many local energy codes are exceeding LEED's ASHRAE 90.1-2010 Baseline. Has anybody successfully claimed energy savings for unfinished tenant spaces based on local code?