Do you use Value Engineering in documenting this process?

We have a project that has six buildings on it. The owner wants five of them to be CS, and one of them to be NC. Are we able to mix rating systems within an overall LEED Campus registration?

Our project is hoping to use the v4 criteria (diverse uses) to meet the requirements for a v3 project.

In DesignBuilder for the daylight simulation you have to impose a value for the parameter "margin", which is defined in the following way: Enter the margin (in m or ft) around the zone boundaries w

Dear colleagues, maybe my question will be stupid, but I hadn't found a strict answer, so I'm a little bit confused. We have a project that has no permanent irrigation system, only a has a hose bi

We were recently denied a credit in the Final Review Phase on the basis of information that was presented in the Preliminary Review Phase that GBCI had no comments upon.

Hello, I would like to get confirmation on whether the following approach of demonstrating compliance with LEED requirements could be accepted or not.

I am calculating the percentage of materials that contain recycled content. It says MEP type work is not to be included in the calculation.

We received our preliminary design review comments back and were asked to include a daily average visitors number. Our average users value is 3, peak users value is 27, and the FTE value is 3.

Heads up that an updated list came out in September 2013 and can be accessed here - www.sfenvironment.org/sites/default/files/fliers/files/sfe_th_pesticides_reviewed_091313.pdf We'll be updating