Log in
Forum » CS-2009 EAc5.2
Loading...
Topic

Shell with no energy or metering systems

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Martin Meehan on Nov 24, 2017, 5:57 am

Hello

My project is to be a shell with no HVAC, lighting or metering systems. It is understood that there will be one tenant for the building.

To comply with this credit, is a...

Last reply: Marcus Sheffer, Nov 24, 2017, 12:54 pm

Could you explain the plan just one more time?

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Charles Nepps on Dec 16, 2016, 11:17 am

I am still a bit unclear about the the M&V - Tenant...

Last reply: Charles Nepps, Dec 22, 2016, 11:12 am

> 75% M&V Template Requirement

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Martin Meehan on Aug 15, 2016, 10:27 am

Dear all,

Our project recently received the comment below which appears to require an Option B or D 'template' to be submitted with our plan if a tenant is to take 75% or more of the...

Last reply: Emmanuel Pauwels, Sep 30, 2016, 12:34 pm

Metering Requirements

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Ciaran McCabe on Sep 28, 2016, 4:44 pm

Hi, I am working on a commercial project that consists of retail units on the ground floor and offices on the levels above.Currently the base build does not show and ten ant metering for the...

Last reply: Marcus Sheffer, Sep 28, 2016, 5:59 pm

Corrective Actions and Sub-metering

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Jatuwat Varodompun on Aug 31, 2016, 12:15 pm

For the submetering, we can just provide the box that allow the tenant to install the meter, right? Also, we have to declare in plan that once the tenant install the meters, facility manager (or...

Last reply: Jatuwat Varodompun, Aug 31, 2016, 7:08 pm

Tenant is installing the entire energy systems at the building

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Michael Wahjudi on Aug 4, 2016, 3:48 am

Hi all, we have building where the tenant is installing the entire energy related system (ACMV, lighting, etc). The landlord only provide land and structural of the building. Hence the total...

Last reply: Marcus Sheffer, Aug 5, 2016, 6:43 pm

Single tenant in building pursuing Core & Shell

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by David Hubka on Nov 5, 2015, 10:33 am

The building is pursuing C&S certification and has a perspective tenant that may fit out the entire space. We are proposing to charge the perspective tenant the entire electricity bill minus...

Last reply: Saud Abdul Rasheed, Nov 5, 2015, 11:44 am

Submetering- Core & Shell 2009

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Mohammad Haj-Ali on Sep 3, 2015, 5:02 am

We're designing an office building that the owner wants to provide flexibility in leasing, such that tenants can rent certain spaces in the floor, whole floors, or the whole building. The owner...

Last reply: Marcus Sheffer, Sep 14, 2015, 9:06 am

Co-working space

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Gustavo De las Heras Izquierdo on Sep 10, 2015, 4:46 pm

Hallo,

My project is a co-working space for multiple companies. The tenants won't be assigned a fixed space to work in, and there are common spaces where anyone can sit down and work....

Last reply: Marcus Sheffer, Sep 14, 2015, 9:04 am

Leasable areas fed by the utility

CS-2009 EAc5.2: Measurement and Verification—Tenant Submetering
posted by Ricardo Sá on Aug 3, 2015, 4:46 am

An office building is being certified under LEED C&S. All leasable areas will be fed directly by the utility. They will be equipped with utility meters and the utility manager will invoice...

Last reply: Marcus Sheffer, Aug 3, 2015, 9:21 am