Log in
Forum » CS-2009 EAp2
Topic

CA Title 24 Energy Modeling

CS-2009 EAp2: Minimum Energy Performance
posted by Prudence Ferreira on Oct 20, 2010, 5:33 pm

In Title 24 we are allowed to exempt the low level nighttime lights and exits signs around exterior doors from the energy model as typical lighting exemptions. For the purposes of LEED are we...

Last reply: Marcus Sheffer, Oct 25, 2010, 2:18 pm

"Advanced Energy Modeling for LEED, Technical Manual"

CS-2009 EAp2: Minimum Energy Performance
posted by Maya Karkour on Oct 8, 2010, 7:12 am

Dear all,

USGBC has recently published a "Advanced Energy Modeling for LEED, Technical Manual". This manual includes tips for modeling purposes of LEED v2.2. My questions are:

1)...

Last reply: Marcus Sheffer, Oct 8, 2010, 8:55 am

Tenant Outfit Proposed Spaces

CS-2009 EAp2: Minimum Energy Performance
posted by Darren White on Sep 19, 2010, 12:01 pm

I am in the process of simulating a 21 floor building, divided into three uses: offices, school, and retail space. None of the floors are planned and the offices have yet to be designed. If I...

Last reply: Marcus Sheffer, Sep 20, 2010, 10:21 am

Process and non-Process energy

CS-2009 EAp2: Minimum Energy Performance
posted by Billy Ng on Jul 29, 2010, 10:55 pm

For Core and shell rating system, do I consider the Process energy in the calculation.

below equation is what i have in mind after read the guidebook.
[(Process + non-Process...

Last reply: Edwin Wealend, Sep 20, 2010, 9:50 am

Non-centralised AC for office tower

CS-2009 EAp2: Minimum Energy Performance
posted by Edwin Wealend on Sep 8, 2010, 12:25 am

HI,

We are working on a small soho office tower, about 28 floors tall with a GFA of around 20000m2. We want to use split type or VRV AC unit for the offices instead of doing a full blown...

Last reply: Edwin Wealend, Sep 16, 2010, 7:44 pm

Target Finder in UAE

CS-2009 EAp2: Minimum Energy Performance
posted by V. Miller on Sep 15, 2010, 9:41 am

Hi Dear,

I am trying to use the target finder for a project in UAE, but it does not allow for any international location. Can I leave it blank?

Cheers,
V

Last reply: Christopher Schaffner, Sep 15, 2010, 9:51 am

restaurant equipment

CS-2009 EAp2: Minimum Energy Performance
posted by Diana Wellenbrink on Aug 18, 2010, 11:14 pm

Should future restaurant equipment be enluded in the calcs?

Last reply: Marcus Sheffer, Aug 20, 2010, 3:08 pm

Lighting and Equipment controlled by BMS

CS-2009 EAp2: Minimum Energy Performance
posted by Diana Wellenbrink on Aug 18, 2010, 11:19 pm

What is the corret way of calculating lighting and equipment controlled by Building Management System?

Last reply: Marcus Sheffer, Aug 20, 2010, 2:20 pm

Computer load

CS-2009 EAp2: Minimum Energy Performance
posted by Diana Wellenbrink on Aug 18, 2010, 11:11 pm

Should a computer be calculated as 400W or according to Energy star in our case 175 KWh/annual or around 80 W?: ref: http...

Last reply: Christopher Schaffner, Aug 19, 2010, 8:05 am

Exterior Building Lighting Power calculation

CS-2009 EAp2: Minimum Energy Performance
posted by Adriana Hansen on Aug 5, 2010, 1:48 pm

Hello,

I am going to certify a shopping center and I have two questions:

1) Its façade uses recessed volumes to create movement and interesting angles, interposing façade panels at...

Last reply: Christopher Schaffner, Aug 9, 2010, 8:12 pm