Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4461 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Off-site renewables calculated in Optimized Energy Performance in LEED v4
NC-v4 EAc2:Optimize energy performanceposted by Deb Favaretto on
Hi,
11
Fri Sep 25, 2020, 9:55 pm
Point of extraction, manufacturing, and purchase for steel?
NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materialsposted by emily reese moody on
Need a sanity check here...
4
CEO
Green Badger
LEEDuser Expert
115 thumbs up
Fri Sep 25, 2020, 5:52 pm
Dimensional Lumber - category
NC-v4 EQc2:Low-emitting materialsposted by Chyanne Husar on
Does dimensionable lumber used for blocking or support for interior wall partitions considered part of materials to be evaluated for LEM compliance?
0
USGBC approved alternate standards?
NC-v4.1 EAp2:Minimum Energy Performanceposted by Jon Penndorf on
"Comply with ANSI/ASHRAE/IESNA Standard 90.1–2016, with errata or a USGBC-approved equivalent standard."
2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4461 thumbs up
Thu Sep 24, 2020, 6:15 pm
Thermal comfort for LEED Airports
NC-v4 EQc5:Thermal comfortposted by Mackenzie Anderson on
I am trying to find any official information on exceptions/modifications for LEED certifications for airports.
2
Cadmus Group
LEEDuser Basic Member
13 thumbs up
Thu Sep 24, 2020, 5:44 pm
Pre-rinse spray valves
Schools-2009 WEp1:Water use reductionposted by Kelly Beisswanger on
Trying to figure out if I need to and how/where to include values for pre-rinse spray valve use.
1
Thu Sep 24, 2020, 7:49 pm
Dwelling units monitoring
NC-v4.1 EQp1:Minimum Indoor Air Quality Performanceposted by Nicolas Martinez Ochoa on
Hello everyone,
0
Option E LRV for glass
CI-v4 EQc6:Interior lightingposted by Deborah Stadler on
What should be included for LRV for glass walls? LRV information on glass walls is sparse. Just include the wall beyond and not the glass itself?
3
Senior Project Manager
JLL
LEEDuser Premium Member
3 thumbs up
Thu Sep 24, 2020, 1:49 pm
Can a non-compliant industry-wide type III EPD be tracked as a product-specific EPD instead?
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Jenelle Shapiro on
We just received comments back from review for the construction credits on a product and several of our industry-wide EPDs were flagged because they did not include conformance to ISO 21930 or EN 1
3
Sustainability Project Manager
Atkins
LEEDuser Basic Member
59 thumbs up
Wed Sep 23, 2020, 11:46 pm