Forum quick links
Flushing Out a Hockey Rink
NC-v4 EQc4:Indoor air quality assessmentposted by Cynthia Kaplan on
My project is a new construction hockey arena pursuing Option 1, Path 1 for the flush out. The thing is, we have ice. Ambient temperatures will not be above 60 degrees.
Can we pursue both Path 1 and Path 2
NC-v4.1 LTc5:Access to Quality Transitposted by Jyothsna Giridhar on
Am I correct in my interpretation that we cannot include campus shuttles as well as public transit? Does it have to be either one or both can be counted?
V4 Entrance mats/roll-up mats
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by Kathryn Haeberle on
Hi, does anyone know if the v2009 interpretation still applies that the first 3 ft of the 10 ft must be a permanent system (like recessed mat system) and the remainder can be roll-up mats
ASHRAE 90.1 - 2016 Mandatory Requirements, Submetering
NC-v4.1 EAp2:Minimum Energy Performanceposted by Parker Hall on
Can you please check my logic and confirm if submetering is required on all LEED v4.1 BD+C projects?
MPR2 LEEDuser Forum questions and comments prior to the 09/05/17 upgrade
NC-2009 MPR2:Must be a complete, permanent building or spaceposted by Brian Bartholomew on
Did we lose access to all the MPR2 LEEDuser Forum questions and comments posted prior to the 09/05/17 upgrade?
University Participation in Utility Solar
NC-v4 EAc7:Green power and carbon offsetsposted by Rebecca Aarons-Sydnor on
We are working on a new building at a University that has an existing agreement with the utility to offset 96% of the energy used with utlity-owned solar farms, and all RECs are retired on the Univ
EU Special Area of Conservation - ACP?
NC-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by Devyn Olson Sawyer on
Our project is located in the west of Ireland. The project is a warehouse extension (a single LEED project) on an existing commercial campus, and the entire campus is the same owner/occupier.
LI 10102 - Letter of Commitment - Register incomplete space separately?
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Deb Favaretto on
Hi,
Low-Emitting Materials Calculator - Category Quantifying Option(s)
NC-v4.1 EQc2:Low-Emitting Materialsposted by Catherine Blakemore on
For each Category do all product need to be quantified the same way way....meaning if Volume or Surface Area are an option, do all products need to be quantified by volume for example or can both v
PM2.5
NC-v4.1 EQc4:Indoor Air Quality Assessmentposted by Sharon Bessa on
Taking measurements in a building located in a city that is considered to be in attainment for PM2.5.