Our project boundary is limited to building only excluding land area. One problem is..waste collection area is installed outside.

I've heard that the location should be taken from where the steel in formed (manfactured) to determine the milage for Regional Materials since it is difficult to document the extraction location.

Hello, We have a situation where we are attempting to model a highrise building of approximately 450,000 square feet. The predominant use of this building is residential.

do the spaces,zones and air systems in the baseline should have the same names as in the proposed design and the ones in the upploaded drawings? in the mechanical equipments schedules the engineer

is the electrical rooms and internal swimming pools cooling is considered as a process load or not? and what leed reviewer should see in the energy model output. regards

Assuming a 10 storey building where the first three floors are retail floors and the remaining 7 floors are office floors, is it generally possible to use the building area method? Is it possible t

WE have a roof garden that is irrigated over and existing building that is not part of the LEED certification. We are defining a LEED boundary for our 2009-NC project.

I'm working on a university student housing project where the dwelling units each contain a small closet to house a stackable washer and dryer.

Please verify that when calculating the minimum 25 linear foot distance from an opening to an exterior designated smoking area, whether or not the measurement can go around solid obstacles.

In a Nov.