Hi, in our project we have a 60% of the site vegetated, planted with meadow, we have a small impervious surface near the building, and the building itself.

Reading the guidance and from past projects its always been pretty straightforward for showing compliance with an apartment or dorm when every room has an on/off switch.

Would a private 2-person office count as one space or 2 when calculating the 50%?

I am currently working on a project that has a dual HVAC system. A Daikin mini split ductless system and a DOAS Desert Eir system with ducts & filtration.

We are working with a building where 60% of the annual energy use accounts for process energy due to a large data center.

We are having the same problem working on a building where 48% of the annual energy usage is process load from computers, screens and tv’s.

Under Option 1 Table IEQc4.3-1 in the online form list "FloorScore" as the reference standard for "Sealer: Waterproofing, Concrete/Masonry", while it list "SCAQMD Rule 113" as the reference standar

In an addenda issued on 4/14/10 the followimg is stated, “Mineral-based finish flooring products such as tile, masonry, terrazzo, and cut stone without integral organic-based coatings and sealants

Hi All, Our site is starting off with a mock up guest room villa as a test bed before we construct the balance of 90 odd guest villas.

LEED project boundary lines that “slice” through party walls must not pass through any MEP service infrastructure.