Forum quick links
Estimating Energy Performance Scores before registering a project
EBOM-v4.1 EAp3:Energy Performanceposted by Bob Snow on
I am trying to estimate the current performance of a building but it appears the only way to see what the GHG Emissions Score, Source Energy Score, and Energy Performance Score is to fill out
Light Pollution Reduction
EBOM-v4 SSc4:Light pollution reductionposted by AMIR ZULKHAIRI AHMAD BANGI on
Hi All, can anyone explain the meaning of "the lamps are adequately shielded" in the Light Pollution Reduction Criteria?
Regarding Embodied Carbon/LCA Optimization
NC-v4.1 MRc2:Environmental Product Declarationsposted by Nagaraj Sankar on
In this credit, How can I prove that my purchased material has compile with Embodied Carbon/LCA Action Plan or other impact reductions .
Virtual DES Energy Rates
NC-v4 EAp2:Minimum energy performanceposted by Todd Tewksbury on
When modeling district cooling and heating systems using Option 1, Path 1: ASHRAE 90.1-2010 Appendix G, the LEED Reference Guide instructs the following: "If tariffs or rates are not available from
Slab / Floor Insulation, is it mandotary
Homes-v4 EAp1:Minimum energy performanceposted by Omar Elrawy on
Hi,
For the prerequisite requirement to add R-19 insulation to floor / slab under energystar, is it required on every floor?
Knowing that all floors are airconditioned,
Using v4.1 Credit Substitution, Thresholds tab reflecting v4 requirements
NC-v4.1 EQc2:Low-Emitting Materialsposted by Darrah Jakab on
My project is registered as v4 and is using the v4.1 credit substitution for Low-Emitting Materials.
If all products in one category comply with the VOC emissions evaluation do we need to list the cost or surface area?
NC-v4 EQc2:Low emitting materialsposted by Summer Gorder on
We are having a tough time getting the costs from our subs. The subs says that the cost is bundled with other material and they can't break it up.
Can Core and Shell point thresholds apply to New Construction projects with 50% unregulated energy cost in LEED v4?
NC-v4 EAc2:Optimize energy performanceposted by Michael on
Hi LEED experts, in LEED v4.1, NC projects with more than 50% unregulated energy cost can apply CS point thresholds to count points. I would like to ask if LEED v4 also applies
Moving a building
Schools-NC-v4 MRc5:Construction and demolition waste managementposted by Kath Williams on
Instead of demolition or deconstruction, this project will move an entire building across the street to another site on the campus.
BECx & ASTM E2813 Standard - Fundamental vs. Enhanced building enclosure commissioning (BECx).
NC-v4.1 EAc1:Enhanced Commissioningposted by Shahrzad Pedram on
LEED v4.1 references ASTM standard E2813 Standard Practice for Building Enclosure Commissioning regarding BECx requirements.