Hi, I have an adhesive technical data sheet stating the VOCs emissions 3 days and 28 days after laying of the adhesive. I do not think this is enough to document the requirement, but do you think

We refer to ASHRAE 90.1 Supplementary Addendum i which discuss the LPD of tradable surface on table 9.4.5.

Casework is specified under division 12 of the CSI spec format, similar to loose furnishings. Does that mean we can and should exclude it from the calculations for the MR credits?

Hello, Due to where the building is located (between fields), it seems we need to have these bait blocks (placed outside the buildings) used continuously or there is a problem.

On a new construction project which is the better way to go when installing a new chiller? A chiller with HCFC or HFC? Thanks

Dear all, Our project is a synthesized building with office, shopping mall and residence. Only the part of the office will apply for the LEED certification.

“For mixed-use projects, no more than 1 service within the project boundary may be counted as 1 of the 10 basic services, provided it is open to the public.” 1. Does this mean that only 1 service

Hi Eliot, Is this credit achievable if the site is located in a previously developed site? what if the developer introduce native plants, which will enhance wildlife habitat?

Hi all, I have an issue properly defining the project boundary for a Train Station on a large overall site which includes the station, outdoor plaza, train platforms, large parking lots, a substati

Does the (airflow sensor) need to have any specifications other than the required accuracy (which is 15%) which was mentioned in the study guide?