Forum discussion
CS-2009 EAp2: Minimum Energy Performance
Hi,
Hi,
in EU most countries have feed-in-tarriffs, which reimburse the owner for energy produced at a higher rate than the cost of energy. This would therefore provide a more favorable calculation for EAp2, EAc1 and EAc2 when "using the building's annual energy cost". Does anyone know if feed-in-tarriffs can be used in the calculation?
Thank you for your help
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
A portion of our building envelope is historic. Can we exclude it from our model?
For an existing building, do I need to rotate the model?
Our process load is higher than 25%. Do we have to justify that?
Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?
Can mezzanines open to floors below be excluded from the energy model?
How do I provide a zip code for an international location?
For a project outside the U.S., how do I determine the climate zone?
For a project outside the U.S., how do I determine the Target Finder score?
Do hotel rooms need automatic light shut-off control?
How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?
The Section 9 space-by-space method does not include residential space types. What should I use?
Can the Passive House Planning Package (PHPP) be used to energy model for LEED?
Which baseline HVAC system do I use if my building has no heating or air conditioning?
Our project has a diesel backup generator. Should we include it in our energy model?
Can SHGC be higher in the proposed than in the baseline model?
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5907 thumbs up
May 6, 2013 - 11:22 am
For EAp2/EAc1 you can use what ever rate makes sense as long as you use the same rate for both models.
For EAc2 you need to use the virtual rate from your modeling results. You could try to use a different rate but make sure you provide ample justification.