The MSDS for one component of a 4-part sparkproof/conductive flooring system lists a theoretical VOC content level (i.e. as packaged) and an As-Applied content level.

Is it okey to provide VOC values according to EU standards at 250 ° C? What does g/L less water means?

LEED NC v2009, we have a paint system which will apply to an interior wall as follow:

1- Primer

2- Stucco

3- Armorcoat polished plaster spatula P70

Hi, we are a GC on a LEED NCv2009 project & need to paint some interior glass. I'm trying to confirm the VOCs the paint/coating needs to comply with.

Hi there, I am working on a project that specified a paint for a covered car park pavements that is an epoxy covering using for pavement's signals.

EU Standards vs LEED We have some problem with the VOC (g/l) content in our products.

What is the reason for an distinction between non-flat (textured) and flat paints? Plaster has to be seen as coatings? What about underground parking lots, do they count as interior space (on the o

Also is there a specific VOC limit for Wallpapers? I saw this question asked previously on another forum but I not find the answer.

thanks in advance for your help!

Good morning friends, I would like to understand how to use the table SCAQMD Rule 1113 to know the VOC limit in any material in general, and in floor coating specifically.

I have seen that this topic has been discussed quite a bit previously, however I haven't seen any consensus on the subject.