Post a question or comment
Credit Filters
Minimum IAQ Performance
Filter by location
Forum
Topic
Replies
Recent

Exhaust-only ventilation?

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Laura Charlier  on 

Does anyone know if there is a LEED interpretation that allows exhaust-only ventilation in multifamily units under LEED-NC? Thanks!

1
Thu Apr 14, 2016, 3:42 pm
1
Thu Apr 29, 2010, 1:17 pm

ASHRAE 62.1-2007 Table 6-4 & GBCI Review

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Nathan Echtenkamp  on 

To date I have never received a comment from a reviewer regarding required exhaust per Table 6-4.

1
Tue Nov 12, 2013, 2:52 am

Natural ventilation calculations

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Charalampos Giannikopoulos  on 

Before the excel spreadsheet introduction naturally ventilated spaces were referenced in the IEQp1 form. Where can those spaces be referenced in the spreadsheet? Thank you!

1
Fri Jan 20, 2017, 3:59 pm

IEQ Prerequisite 1 – Minimum Indoor Air Quality Performance

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Harsharan Kaur  on 

We are working on a Project, in which most of the rooms are complying with the ASHRAE 62.1-2007 Natural Ventilation requirements, stated under the IEQ Prerequisite 1 – Minimum Indoor Air Quality Pe

1
Wed Jun 11, 2014, 7:08 pm

Minimum ventilation in Storage, electrical rooms, lift m/c rooms

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Arub Vijay  on 

Do we need to comply with the ventilation rates in Table 6-1 (ASHRAE 62.1-2007) for electrical rooms, lift machine rooms, electrical rooms etc?

1
Fri Feb 24, 2012, 7:59 pm

Design System Primary supply Airflow (Vpsd)

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Charalampos Giannikopoulos  on 

For a VAV (multiple-zone) system should the Design System Primary supply Airflow (Vpsd) sum up the total supply (and not the outdoor) air of each zone?

0

Is APPENDIX Needed

NC-2009 IEQp1:Minimum IAQ Performance
posted by  ABDUL MUTHALIB MOHAMED  on 

In IEQp1 i already Upload 62MZcalc and Results from a Simulation Software and Fill the narrative Tab and all other but my check compliance is still indicate (Y) so my Doubt Whether we need to fi

0

IEQp1 ventilation cals

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Gordon Nielson  on 

I am calculating the ventilation requirements for a conference room. From the ASHRAE Table 6-1 I selected .06 cfm/ft2 and 5 cfm/person. The room has occupancy of 8 people.

1
Fri May 29, 2015, 4:37 pm

Transfer air into residential units

NC-2009 IEQp1:Minimum IAQ Performance
posted by  AshLee Eustace  on 

I'm trying to show compliance with IEQp1 using indirect mechanical ventilation in residential units. Makeup air units supply the corridors which indirectly ventilate the residential units.

1
Thu Jul 18, 2013, 2:59 pm