I have project that is purchasing chilled water from the local utility.

The equipment capacities for the baseline building design shall be based on sizing runs for each orientation (see G3.1.2.2 and G3.1.2.2.1).

In one of our projects, we've 100% naturally ventilated school building, which will have ceiling fans for comfort, a total area of approx 80,000 sqft, Ground + 2 floors.

I am modeling a building which is connected to a district CHP system.

We are modeling and commissioning a dormitory building where 4 pipe vertical fan coils have been installed.

I want to clarify that ASHRAE 90.1 Appendix G 2007 (sec 5.4, 6.4, 7.4, 8.4, 9.4 and 10.4 ) is applicable to Option-1 Whole building energy simulation for both EA Prerequisite 2 and EA Credit 1.

I think I posted this question on the wrong page beforehand, so I'll post it again here. We are trying to account for a CHP plant near our project in our energy model.

We have a project opting to get the maximum 19 credit points in EAc1.

We are including a r&d / manufacturing space within our LEED project boundary that includes several pieces of testing equipment & support spaces which provide necessary conditions to comple