Hello, I am currently working on a LEED NCv2009 project which includes a small building ~1,150sf, and has 200sf of regularly occupied space.

I have a question regarding G3.1.2.8. Per this section a return fan is required for the baseline system if there is a return fan in the proposed model.

Hello everybody, I´m simulating a LEED Project. When calculating the powers of the fans as G3.1.2.9, the result is adequate.

1) Why is column regularly occupied sf in leedonline EAp2-1 table needed? 2) We have filled out EAp2-1 as per the spaces used in the energy model, not the project per say...i.e.

Should we use the power density of the 90.1 without addenda or should we use the addendum I for the "baseline" of the energy simulation of EAp2?

I have a Tenant Improvement that has VAV terminal units connected to an existing VAV AHU. The contractor and owner decided to save money and utilize stand alone control.

Hi There, We are looking into a project which an office building and is going to be LEED certified.

I am working on a multifamily building. The proposed system is a Rooftop unit with constant vlume and 100% outdoor air.

While modeling the building in the space-by-space method, there are a couple of closets that are not conditioned, therefore have been model as unconditioned in TRACE 700.

I have two questions concerning Task Lighting: 1- for an office building, should I count task lighting as process load? 2- For Base-case Simulation, does the LPD limit set by ASHRAE 90.1 include