I have a relatively large data center (200kw connected load) in a relatively larger building (250k sf) so that the data center is not the major program space, but is a relatively large minority of

Actually I'am not able to correlate section 14 required inputs under pressure drop column "CFMd", and the requirements of ASHRAE TABLE 6.5.3.1.1 B in (pascals/ in.w).

Dear community, I have a project where some spaces will be left for future use, while most of others are designed and built for immediate use.

Our project is at South East Asia, do we need to comply to ASHRAE 90.1 on electric shower?

I am working on a project that was registered under LEED NC 2.2. Will the USGBC allow us to apply requirements from 90.1 - 2010 to the project instead of 90.1 - 2004?

Hello, We are working on a residential project where the HVAC system won´t be provided for the apartments, the project scope contemplates the preparation and space for the equipments so every own

Dear all, We are working on a single building certification that is located within a two tower project.

I have two questions regarding the inclusion of UPS in the 'Energy Star' calculation in LEED v2009. Q1. The LEEDv2009 Reference Guide language says...

Dear forum, We have a very critical problem for a LEED C&S 2009 project located in the north of Mexico. The project will be a 13th story office building.

Hi, We are in the process of doing Energy Simulation for Garments Factory. We have completed the base case part and proposed case is pending.