Forum quick links
EPD Stud - Separate products count towards 20+ goal under 1 EPD
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Allison Para on
Hello LEED Pros,
No Cooling Tower
CS-v4 WEc3:Cooling tower water useposted by Adriana Hansen on
Regarding the alternative compliance path to the LEED v4 credit Cooling tower water use (BD+C)<https://www.usgbc.org/node/2611780>, a Core
No Cooling Tower
CS-v4 WEc3:Cooling tower water useposted by Adriana Hansen on
Regarding the alternative compliance path to the LEED v4 credit Cooling tower water use (BD+C)<https://www.usgbc.org/node/2611780>, a Core
Make Up Air Units Modeling Requirements (System or Process Load) - ASHRAE 90.1-2010
NC-v4 EAp2:Minimum energy performanceposted by Richard Tran on
Hello,
Water Heater Efficiency per Table 7.8 of ASHRAE 90.1-2010
NC-v4 EAp2:Minimum energy performanceposted by Richard Tran on
Hello,
20 kinds of permanent installation materials
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by FEI WANG on
We have a hotel project, the use of high-grade wallpaper, valid for more than 10 years, can be counted as permanent installation materials
Waste management plan submission with multiple GC's
NC-v4 MRp2:Construction and demolition waste management planningposted by Blake Weaver on
I am working on a multiphase project where each phase has dramatically different scopes of work for the project and each has a different GC.
owner occupied area only?
NC-v4 EAc7:Green power and carbon offsetsposted by Alfonzo Collins on
I'm working on a residential building with about a dozen apartments and limited common area. The apartments have their own utility meters, sand ownership has no ability to read those meters (
Hand-washing faucets in Classrooms or Cafeteria
Schools-NC-v4 WEp2:Indoor water use reductionposted by Danielle Waters on
We have an Elementary project confused whether to specify low-flow on Classroom faucets and 'hand wash' faucet in Cafeteria prep area.
Test and balance
NC-v4 EAc1:Enhanced commissioningposted by Heather Holdridge on
I understand that there were not any requirements regarding TAB in LEED 2009 -- is this still true for v4? Just want to confirm that there are no issues with having the balancer contracted un