See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Laminating Adhesives applied off-site

NC-v4 EQc2:Low-emitting materials
posted by  Catalyst Partners  on 

For the laminating adhesives, v2009 required all laminating adhesives on and off site to contain no urea-formaldehyde.

0
Default Avatar

Is Energy Recovery Mandatory?

CS-v4 EAp2:Minimum energy performance
posted by  Cathal Heneghan  on 

Hi all

Can you confirm if Energy Recovery per 6.5.6.1 is a mandatory requirement for the proposed building?

Thanks

 

1
Fri Jun 22, 2018, 1:41 pm
Default Avatar

Baseline case system selection- Exception

NC-v4 EAp2:Minimum energy performance
posted by  Manikandan S  on 

Hi All,

3
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4461 thumbs up
Thu Jun 21, 2018, 4:09 pm

Does economic analysis to forgo DES phaseout apply in V4?

NC-v4 EAp4:Fundamental refrigerant management
posted by  Jeff Ross-Bain, PE, LEED Fellow, WELL AP  on 

In the 2009 Reference Guide, an alternative path that allows foregoing DES plant replacement through an economic analysis that shows DES replacement is economically unfeasible is clearly stated.

6
Wed Jun 20, 2018, 10:25 pm

Core & Shell with HVAC as future / CI scope

NC-v4 EAp1:Fundamental commissioning and verification
posted by  Stacey Olson  on 

If a project is a cold, dark shell without hot water, can commissioning be deferred as n/a or does a cxa still need to be engaged to preform OPR and BOD review?

0
Default Avatar

EQc6-lighting

NC-v4 EQc6:Interior lighting
posted by  CR ZHANG  on 

strategy A:

0

Overtime Commutes?

EBOM-v4 LTc1:Alternative transportation
posted by  Kaarina Nehring  on 

Hi all!

1
Thu Jun 21, 2018, 12:03 am
Default Avatar

Existing Building HVAC being upgraded and will serve new addition - LPB?

NC-v4 MPR2:Must use reasonable LEED boundaries
posted by  Sue Bryant  on 

WE have a project that is an addition to an existing building. The addition is served by the HVAC from the existing building.

1
Mon Oct 15, 2018, 7:46 pm
Default Avatar

Maintaining 3rd Party

NC-v4 EAc1:Enhanced commissioning
posted by  Brett Farbstein  on 

I have had success acting as the fundamental & enhanced CxA as an employee of the project architect as long as the design team included an outside MEP engineer in v2009.&nbs

1
Wed Jun 20, 2018, 1:37 pm

energy recovery control

CS-v4 EAp2:Minimum energy performance
posted by  Francesco Passerini  on 

I’m modelling a System 8 baseline model according to ASHRAE 90.1-2010.

An exhaust energy recovery system is needed according to table 6.5.6.1.

1
Wed Jun 20, 2018, 2:21 pm