Forum quick links
Cooling Tower drift eliminator - standards for processes
NC-v4 WEp2:Indoor water use reductionposted by Dionisio Franca on
We checked the drift eliminator specs with the manufacturer selected for our project and they told us that that their draft eliminators reduce drift to 0.05% only.
LEED v4 Indoor Water use reduction or outdoor water use reduction
NC-v4 WEp2:Indoor water use reductionposted by Lou Niles II on
Hello I am trying to get some guidance with regard to LEED v4 and outdoor sinks.
Sinks used in outdoor spaces for office buildings or campus , maybe for the BBQ gathering area.
Gender Neutral toilets
NC-v4 WEp2:Indoor water use reductionposted by Jude Chakraborty on
Hello, we are working on an University project which has a directive on Gender Neutral toilets which means there are no urinals in the building.
Dual Flush Flow Rate
NC-v4 WEp2:Indoor water use reductionposted by Leanne Conrad on
We have a product data sheet for a dual flush toilet that states 6L/3L with an effective flush volume of 4L.
Percent of Occupants
NC-v4 WEp2:Indoor water use reductionposted by Amy Ruffino on
On the Reduction Calculation spreadsheet, how should the "Percent of Occupants" be filled out for kitchen sinks or urinals?
Watersense - Local Equivalents?
NC-v4 WEp2:Indoor water use reductionposted by Leanne Conrad on
Let's talk about watersense and local equivalents.
Prerinse spray valves in Europe
NC-v4 WEp2:Indoor water use reductionposted by Antti Karppinen on
Hi,
Sensor Faucets
NC-v4 WEp2:Indoor water use reductionposted by Jennifer Rennick on
In prior versions of LEED, sensor faucets were given a credit for reducing hand washing duration from 15 seconds to 12 seconds.
Open-Loop Heat Pump System/Process Water Use
NC-v4 WEp2:Indoor water use reductionposted by Kara Rousselle on
Can an open-loop ground source supply/injection well heat pump system be used for the heating and cooling system on a LEED v4 project? Does the WE Prerequisite: Indoor Wat
Which flow rates to use?
NC-v4 WEp2:Indoor water use reductionposted by Nate Tsang on
Hi all, The prerequisite lists the baseline flow rates at 60psi (415 kPa). Does this mean that the proposed flow rate must also be at 60psi?