From Leeduser.com, CS-2009/IEQc1, Credit Requirements, Potential Technologies & Strategies: "Installation of CO2 sensors in tenant spaces is not required during core and shell construction, and

Credit requires to monitor CO2 level for densely occupied spaces. Is there any requirements for the minimum no. of sensors per space / sq ft?

We wish to attempt and submit documentation {LEED Core and Shell 2009 (V 3)} for following credits (with no control on Tenant Spaces): 1. Outdoor Air Delivery Monitoring (IEQ Credit 1); 2. Indoor C

Hi! I'm finishing a project and must indicate the levels to be configured in ppm CO2 sensor environments. As an example, I have a training room with 8 people and an area of ​​497.29 sf.

It seems that scop of CS does not require CO2 sensors to be placed in tanent space.

Dear all, I understand that LEED doesn't require you to specify a maximum CO2 level for this credit.

An office building that is being certified under LEED C&S will have 80% of its gross floor area without a complete interior fit-out at time of construction work completion.

Hello everybody. I have a question: Is installation of fan motors with variable frequency drive in main AHUs an acceptable option of outdoor air measurement? I went through credit interpretations,

Hello all, I would kindly ask for an information please. My HVAC multizone system, looks like this. VAV AHU system (with sensible heat recovery, no mixing) + Fan Coil Units (FCU).

We have a project where the building is three separate retail tenants all being served by a single ERV that is supplying 100% of the space outdoor air.