We have filed for design submittal and are moving into construction phase. The client decided to integrate PVs in the project.

I'm working on a Core and Shell project and recently I was given the energy model made for us by a consultant.

I'm representing a building owner/Landlord who is building a new multi-tenant office building and planning a very large solar installation, targeting net zero electricity and LEED-CS Platinum.

We are working on a LEED CS project where the investor will sell the energy produced on-site by photovoltaic systems to the tenants in the project building, according to internal fees at a premium

Hi Marcus, I've recently been asked if we could prorate the "1% renewable" to account for only the owner controlled annual energy consumption cost rather than the total building annual energy cost

In our project we intend to install PV panels for 300KWp capacity. Its a NC2009 project aiming for LEED platinum. The building is office building with a 24hrs cafeteria.

Dear all, our project will get a biogas CHP plant and we are also targeting EAc6 (Green Power) with exemplary performance.

Hello, Will the energy harvested from a heat recovery equipment installed on a chiller and/or the fresh air system in our project count towards on-site renewable energy?

Hi to target this credit for a new project do you need an energy model to predict what 1% energy cost of is there an alternative approach ?

Preface: LEED CS v3.0 Project in Massachusetts. Our project is designed to produce 16% on-site renewable energy. The energy is fed directly into the building and used by the building.