Wondering how to determine the baseline system for a warehouse that upon initial completion will be a cold, dark shell maintained at 50°F.

We are working on a warehouse building with attached offices in climate zone 5A, with gas-fired rooftop equipment for heating.

Hi! Currently, I'm working on a warehouse's project under LEED certification. There's no heating/cooling system in the warehouses, there's only natural ventilation.

In the CS- project the exit signs are considered to be a part of the emergency lighting. Therefore the lamps are off during normal operation. The proposed exit sign exceed 5 W per face.

Hello, I am wonderinq if you can help me: where no heating system exists the heating system classification shall be asummed to be electric, and the system characteristics shall be identical to the

We have a comment back from GBCI, stating: 1. The Baseline fan power calculations and the SV-A reports for the Baseline model indicate that the exhaust fan systems (xxx1 and xxx2, as indicated in

Hallo everyone, I have a question about process energy. My project is a mixed use for CS, contains office, laboratory, lobby, storage and corridor.

Hello, i am modeling a C&S project- building of 22 floors. clime type:2A .

Assuming a 10 storey building where the first three floors are retail floors and the remaining 7 floors are office floors, is it generally possible to use the building area method? Is it possible t

We are pursueing OPTION 1 (Whole Building Simulation). Thus we also have to comply to the mandatory provisions, e.g. section 9.4 for lighting.