Hello, I made model of quite simple rectangular office building in eQuest v3.65 and energy simulation run succcesssfully, but compliance analysis end with error code ""Error Assign zone to baselin

Dear sir, Our LEED review of EAp2 said that the minimum efficiency for the Baseline Case PTACs should be 9.3 EER. I cannot understand it clearly and find the corresponding terms in 90.1.

Hello! My first post here on LEED User. We are modeling an existing building which has had its rooftop units replaced "in kind", so they are more efficient units, but the same general makeup.

In the Baseline model for a major renovation, for the envelope part: Do we use the “normal” Baseline elements as are in appendix G or do we model the envelope as it was before the major renovation

Hello! We have a project with a 36,000 sq ft GFA and will use HVAC Variable Refrigerant Flow System. For the energy simulation we used equest software.

I got comments back on the energy model for a building that has no HVAC systems designed at the time of completion of the C&S. One comment was that the cooling energy savings seemed too high.

Dear Sir/Madam, per G3.1.3.10, the baseline bulidnging design pump power shall be 349kW/1000 L/s.

I have a few questions regarding modeling of a LEED CS building using option #2 from the Treatment of District or Campus Thermal Energy in LEED guide.

Hello, we are working on a project of approximately 100,000 square feet. The property doesn't want to implement the energy modeling due to economic issues.

I suspect the answer to my question is in my guidebook, but since I bought it in PDF format and its not wanting to recognize my username and password today (yay!), hopefully somebody knows the answ