I am trying to guide a client for LEED  certification. It is for a work-clothes factory with administration, showroom, storage facility etc. The house has been in service for a year now and there...

Hi All

Hope someone can specify the following. When the credit requires "Provide a control drawing sample showing the...

Hi.

Have anyone found a commercial washing maschine in Europe, which meets the CEE TIER 3A requirements, and which can be documented? Miele can delivere a commerical washing maschine,...

Hi

One of my LEED project are situated in a MAster Site and the actual certified building will have a zero-lot line. Does this mean that the only vegetation we should count towards this...

Hi

To caluclate the Rc-value we need to know the amount of refrigerant and the cooliing capacity. As LEED v4 puts it:

Rc: Refrigerant Charge
(0.065 to 0.65 kg of refrigerant...

Hi

In Denmark our chillers are located at the roof, where there in the winter is a risk of freezing. The refrigerant in the cooling units are ammonia.

I have not been able to find...

Hi.

ASHRAE 90.1 states that the design minimum fresh air ventilation of the Baseline should be as ASHRAE 62.1 or as ‘per building official’ which ever is higher but less than the Proposed...

Hi everyone.

We are checking the project written material of a LEED V.4. BD+C project in Copenhagen.

The developer chose the Option 1 of Low-emitting material credit and we only...

"must demonstrate that reuse and recycling strategies were exhausted before sending waste material to energy facilities." The credit form has a text box for your explanation. Lastly, I hope you saw this forum-  https://leeduser.buildinggreen.com/forum/incineration-option-diversion-m... Log in or register to post comments ...

Hi.

The LEED Baseline for public lavatory faucets is 1.9 lpm, which seem very low compare to what is on the marked in Denmark. But is actually do to the 30 sec. duration - so the actual...