If there are 5 building structures in the project, shall I perform separated energy simulation models for 5 individual structures, or 1 model as a whole?

In performing the initial analysis of the Energy Star score for our building it has become apparent we are teetering on the line of a 69.

Is it required to hold an Energy Star score of 69...

I need to pin down the required efficiencies.

System Type: Packaged rooftop air conditioner
Fan Control: Constant Volume
Cooling Type: Direct Expansion (DX)
Cooling...

Hello everyone,

we have a office building in Vienna Austria). I am wondering if we have to do an SWPPP.

According to the EPA Fact Sheet...

Our zip code, 64153, is not listed. Remarkably, most of Kansas City, MO is 641xx! I know KC has been omitted from the RP list since the RP list was published ~ 2 years! USGBC's advice is to...

Implementing LEED requirements during construction is a balancing act: provide too little information, guidance, or follow-up and some things will fall between the cracks, but if you provide too...

Hi!

The design flow in baseline is determined with a temperature difference of 11 C (G 3.1.2.8). This design flow and the fan power (G 3.1.2.9) will give you the specific fan power (kW/m3/...

I think the previous...

Our government job follows the design guidelines set forth in the United Facilities Criteria (UFC). The specific UFC that we are required to follow contains a minimum requirement for VIP parking...

Is there a list or guidance on what is considered hazardous chemicals and gases?
Is the a volumn threshold for each type?
Examples:
Doctor's office sterilization room?
...