Log in
Forum
Topic

context

General forums
posted by Tristan Roberts on Feb 28, 2011, 8:13 am

Jean, in answering this question it would help to know what it is about. Is this about rating system selection, MPR compliance, an EAc1 issue, or something else?
If it's one of the first...

Last reply: Jean Marais, Feb 28, 2011, 8:39 am

Airport jetway re-use

CI-2009 MRc3.1: Materials Reuse
posted by Raphael Sperry on Feb 23, 2011, 6:41 pm

We have an unusual case in an airport project I am working on. It is LEED-CI as we are refurbishing a passenger concourse and some of the back-of-house spaces that go with it. There are 11...

Last reply: Eric Shamp, Feb 27, 2011, 11:25 pm

Case 3 with Development density and Community Connectivity

NC-2009 SSc5.2: Site development - maximize open space
posted by Valentin Grimaud on Feb 25, 2011, 8:22 am

Hello everyone!

I am pretty new at LEED, and I am working on a building in urban areas that will earn SS credit 2. Credit Requirements specifies that "pedestrian-oriented hardscape areas...

Last reply: Tristan Roberts, Feb 27, 2011, 3:28 pm

LEED AP Certificate

CI-2009 IDc2: LEED Accredited Professional
posted by Michelle Bracewell-Musson on Feb 26, 2011, 11:32 am

Thank you for your comments. I have gone to USGBC and into the My Account section and looked in Personal Information, Membership, Accreditation, etc. and still cannot find it. I can find one...

Last reply: Michelle Bracewell-Musson, Feb 27, 2011, 2:57 pm

Online Template Issue- Upload Time Required for IEQp1

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Shannon Allison on Feb 25, 2011, 8:52 pm

I have a technical question about LEED Online and inputting information into the Adobe Form for IEQp1. The issue I am having is the amount of time required to document a building that has several...

Last reply: Roger Chang, Feb 26, 2011, 9:09 am

Approval without any additional approval from the jurisdiction?

NC-2009 IEQp1: Minimum indoor air quality performance
posted by William Weaver on Jan 25, 2011, 1:01 pm

Below is a previously submitted credit interpretation that was accepted. Our project is almost identical to the situation that is outlined. The primary difference between our project and the...

Last reply: Roger Chang, Feb 26, 2011, 8:55 am

CRI vs. noise level for vacuums.

EBOM-2009 IEQc3.4: Green cleaning - sustainable cleaning equipment
posted by Jared Silliker on Jan 25, 2011, 3:37 pm

In responding to review comments on a recent project I'm realizing that the vacuum requirement contains two separate elements, which I previously saw as one. The way the rating and online form...

Last reply: Tristan Roberts, Feb 26, 2011, 1:05 am

Existing Building Envelope Calculations- Help!

NC-2009 EAc1: Optimize Energy Performance
posted by Jonathan Weiss on Feb 21, 2011, 2:26 pm

According to the Appendix G definition, "for existing building envelopes, the baseline building design shall reflect existing conditions prior to any revisions that are part of the scope of work...

Last reply: Marcus Sheffer, Feb 25, 2011, 7:42 pm

EAc1 Combined Heat & Power / Cogeneration

NC-2009 EAc1: Optimize Energy Performance
posted by Michael Heacock on Nov 6, 2009, 1:04 pm

It would be very helpful to see an example of approved documentation for a combined heat & power project specifically for cogeneration, such as a microturbine.

Last reply: Marcus Sheffer, Feb 25, 2011, 7:29 pm

Blow out water closets in LEED for Retail

NC-2009 WEc3: Water Use Reduction
posted by Anders Olson on Feb 15, 2011, 1:34 pm

The LEED NC for Retail rating system indicates a baseline performance of 1.6 gallons per flush (gpf) for all water closets except blow out fixtures, which are assigned a baseline performance of 3...

Last reply: Karen Blust, Feb 25, 2011, 5:45 pm