Kris, LEEDuser does not currently offer official guidance on these forms. However, there is quite a bit of wisdom accumulated in our forums. Links to a couple of those forums are...

Someone added a LEED submittal in our master specifications for Projection Screens that are Greenguard certified. Its my understanding that projection screens, or any product in Division 11,...

Hello:)
In which programs are you doing energy simulations? Did you have some problems with...

We are going to provide the LED strip along the vertical line of the building facade.
If we assume that the 50% of their lumen is above 90 degree from nadir then our bldg. will exceed the...

I am trying to calculate the total cost for CSI 2004 Division 12 products on my project. The owner has purchased many pieces of furniture, furnishings and miscellaneous items. At this point, I'm...

I am working on a project in Germany that is using multiple buffer strips to remove...

In a project's IEQp1 we want to use a non-default value for occupancy of a Conference Room (a Critical Zone). My question is, can we use the 62MZ Calculator to show that that area has adequate OA...

Dear all,

1) Thanks to LEED User for uploading sample documentation. This was very helpful.

2) the M&E working on the project would like to demonstrate compliance using a...

what exactly constitutes a safe, all-weather route between the building entry and the network? We submitted this credit in our design review and for our clarifications we were asked to "provide...

Currently the paper supply that is used in the facility is from a Contract that Corporate has with Staples for copy paper. The copy paper cotnains no recycled in it and a large amount of money is...