Hi, I'd like to verify if I have documented this Pilot Credit correctly?
-I have included exterior windows in the building envelope calculations since the team is preserving all existing...

Under the credit information website with "Credits, Credit Details, Points, Thresholds" listed. The Path is noted as "12% new/8% existing (1 pt) while our template form notes 10 points documented...

We are modelling a Major Renovation Project under the ASHRAE 90.1-2007 - APPENDIX G. The building existing conditions prior to this project renovation includes solar shading devices on all...

my question is how to calculate the sq ft area of the particular room to find out the window to floor ratio ?How to assume that the window area is covered this much area.

What's your record time? What software did you use?

The prereq requires manufacturer cut sheets for the accoustic materials. This is a state funded project and we cannot single-source products - we must offer contractors at least 3 manufacturers...

The ANSI S12.60-2002 standard requires that core learning spaces, between 10,000 and 20,000 cubic feet, have reverberation times that do not exceed .7 seconds. The LEED template states that...

We have tectum panels (acoustic/insulation panels) above our beams. Do we have to add additional panels to the wall to make up for the ceiling area occupied by the exposed ceiling...

IEQ p3 is a requirement of LEED for Schools 2009. I would like to see if anyone has worked on documenting compliance for a school under the ANSI standards calculations.

Specifically, it...

I have a kindergarten, 7440sf, ground level only, all learning spaces are on perimeter with windows. There is only a small road on the one side about 20 m away. There is no Mechanical Ventilation...