Log in
Forum
Topic

IAQ Testing and Furnishings

Schools-2009 IEQc3.2: Construction IAQ management plan - before occupancy
posted by Q + on Mar 21, 2011, 5:28 pm

The Credit Language contains this statement regarding air quality testing and furnishings: "Movable furnishings such as workstations and partitions should be in place for the testing, although...

Last reply: Tristan Roberts, Mar 29, 2011, 12:38 am

Phased IAQ Testing?

Schools-2009 IEQc3.2: Construction IAQ management plan - before occupancy
posted by Q + on Mar 21, 2011, 5:08 pm

Is it acceptable to perform air quality testing in phases? The project in question is a 175K sf school designed in 7 zones. We would like to begin testing on half of these zones while test and...

Last reply: Tristan Roberts, Mar 29, 2011, 12:36 am

Single Ply Roof Membrane Adhesives

NC-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Dwayne Wacenske on Jun 2, 2010, 2:33 pm

of you have seen this, but for those that are just referencing this forum thread related to roofing sealants, please see below information from the updated GBD&C 2009 addendum. All comments are dated...

Last reply: Tristan Roberts, Mar 29, 2011, 12:29 am

NC v2.2 AGMBC

General forums
posted by Michael Asaro on Mar 28, 2011, 2:04 am

We have a three building military project under a single application, seeking a one rating. This is allowed according to the 2005 AGMBC. We need clarification if the buildings are allowed to...

Last reply: Tristan Roberts, Mar 29, 2011, 12:25 am

7th ed. Massachusetts Building Code and ASHRAE 62.1-2004

NC-2009 IEQc2: Increased Ventilation
posted by Paul Girello on Jan 15, 2010, 3:31 pm

I am working on a building that is actually registered under v2.2 and using ASHRAE 62.1-2004 or local code for this credit which Mass State Building Code 7th ed. According to the engineers, the...

Last reply: Tristan Roberts, Mar 29, 2011, 12:23 am

Commingled materials?

CI-2009 MRc2: Construction Waste Management
posted by Habitech Distretto Tecnologico Trentino on Mar 14, 2011, 10:32 am

Hello.
We are working on a CI project.
We have only three types of waste (mixed materials, mix of concrete and mix of gyps), with three different containers. All these materials are...

Last reply: Tristan Roberts, Mar 29, 2011, 12:14 am

Option 2: Restrictions?

CI-2009 SSc1: Site Selection
posted by on Mar 18, 2011, 7:31 pm

Our project has a campus designed for 5 buildings. One building and the entire site was built out and received LEED Certified in 2004. We are in the process of designing the second building, but...

Last reply: Tristan Roberts, Mar 29, 2011, 12:09 am

WEp1 compliance

CI-2009 WEp1: Water Use Reduction
posted by Roberto Meza on Mar 28, 2011, 7:28 pm

Hello,

I have a project in which the only fixture inside the project scope is a small kitchen sink, of course that it will be water efficient.
Shall I fill the LEED Online form...

Last reply: Tristan Roberts, Mar 28, 2011, 11:52 pm

licensed professional exemption

General forums
posted by Tristan Roberts on Mar 28, 2011, 11:09 pm

Robert, I am not sure if this is normal or not. I would get...

performance period start date

General forums
posted by Tristan Roberts on Mar 28, 2011, 11:03 pm

Hi, there are not other credits that would require this, no.