Thanks to all those who have commented, and to Tristan for the article. We’ve been working hard on the LEED Interpretations program, and we’re excited to get Phase I out to the world. I’d like to...

We have a main, fire water and irrigation meter. If read weekly and calibrated properly we have what is needed to obtain 2 points in this credit. We have listed other submeters in the template...

I'm having a hard time understanding what I should actually use here to put in the online forms for...

If pre-1993 plumbing fixtures are still in place (i.e. the bowls), but their flush valves have been replaced post-1993, does that count as 'plumbing renovation' / fixture replacement for the...

To all LEEDuser members using our Water Efficiency Economic Assessment Policy for WEp1: we have made a couple minor updates to it to improve it...

Hi,

I used the EPA's manager Program, and the result for...

EAc1 and EAp2 don't require a PE seal. Is it really required on the SEP submittal for this credit? The guidebook says the SEP "requires confirmation by a validated professional engineer." This...

On the table for Environmentally Preferable Products (Table 1 in the reference guide for MR2), under Roof AND floor AND wall for the insulation component, which version of the California "...

LEED EBOM v2009...

I am using sketchup and Daysim for daylight simulation for a school project. My results give me daylight levels for every hour, every day of the year. The results are abnormally low on Sept 21...