Forum

Topic	Replies	Recent
ID point on joint-use of building? NC-2009 IDc1: Innovation in Design posted by Leticia SooHoo* on Mar 25, 2010, 1:04 pm* I am working on a civic building/performing arts center which is used mostly for evening programs. Has anyone pursued a #LEED ID point based on joint-use of facilities (share building for... Last reply: Tristan Roberts, Mar 25, 2010, 1:58 pm	3	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Thu Mar 25, 2010, 1:58 pm
Response to request for clarifications on ID+C General forums posted by Cara Mae Cirignano* on Mar 25, 2010, 10:25 am* The situation that Niall describes sounds a little iffy. As he alludes to, it states in the Rating System Selection policy (located here:...	0
Response to questions on building criteria and certification fee General forums posted by Cara Mae Cirignano* on Mar 25, 2010, 10:02 am* On page 19 of the MPR Supplemental Guidance (located here: http://www.usgbc.org/ShowFile.aspx?DocumentID=6473) guidelines are...	0
LEED Certification EBOM-2009 IOc3: Documenting sustainable building cost impacts posted by Patrick Egan* on Mar 22, 2010, 9:54 am* This is more of a question, I currently work in a 395,000 sq ft. manufacturing facility in Ava, Missouri within Emerson Climate Technologies. Our shortime goal is to apply for LEED certification... Last reply: Tristan Roberts, Mar 24, 2010, 7:22 pm	1	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Wed Mar 24, 2010, 7:22 pm
Project data forms in LEED Online General forums posted by Tristan Roberts* on Mar 24, 2010, 7:07 pm* Tony, I checked around and don't have any tips on your questions. We're not sure exactly what...	0
COC only for certified wood General forums posted by Tristan Roberts* on Mar 24, 2010, 4:59 pm* Lawrence, your contractor must be getting something mixed up....	0
Partial Retrofit EBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiency posted by Tim Trefzer* on Mar 23, 2010, 5:17 pm* I have a 55-story building that was built in 1991. 98% of the toilets and urinals are original, however 2% have been retrofit. All of the faucets have been retrofit with aerators. I have created... Last reply: Jason Franken, Mar 24, 2010, 10:11 am	1	Jason Franken LEEDuser Expert Sustainability Professional Wed Mar 24, 2010, 10:11 am
refrigerant quantities as a % of the overall project equip.???? CI-2009 EAp3: Fundamental Refrigerant Management posted by sara frye* on Mar 11, 2010, 12:15 pm* We have just received our review acknowledging our phase out plan for CFC based equipment. The next line reads "However the refrigerant quantities as a percentage of the overall equipment has... Last reply: Dan LeBlanc, Mar 19, 2010, 5:42 pm	1	Dan LeBlanc LEEDuser Basic Member Senior Sustainability Manager YR&G Fri Mar 19, 2010, 5:42 pm
EQ c7.1, 2.2 for naturally ventilated buildings in mild climate NC-2009 IEQc7.1: Thermal comfort - design posted by Mara Baum* on Mar 17, 2010, 9:52 pm* I am working on a pair of naturally ventilated dormitories in a relatively cool/mild climate -- the highest mean monthly temperature is 76 degrees F and the RH is between 60-70%, with some... Last reply: Gunnar Hubbard, Mar 19, 2010, 2:43 pm	1	Gunnar Hubbard LEEDuser Premium Member Fri Mar 19, 2010, 2:43 pm
Recertification question EBOM-2009 IEQc1.5: Indoor air quality best management practices - indoor air quality management for facility additions and alterations posted by Matthew Macko* on Mar 18, 2010, 7:47 pm* In five years’ time (or less), when an owner goes to get the building recertified under... Last reply: Jason Franken, Mar 19, 2010, 12:42 pm	1	Jason Franken LEEDuser Expert Sustainability Professional Fri Mar 19, 2010, 12:42 pm