| Topic | Recent |
|---|---|
Defer CreditsGeneral forumsposted by Emily Catacchio on Dec 1, 2011, 8:42 am
Dana, Last reply: Emily Catacchio, Mar 7, 2012, 10:49 pm |
|
How do I find replacement lights?EBOM-2009 MRc4: Sustainable purchasing - reduced mercury in lampsposted by Michael Smithing on Mar 6, 2012, 8:38 am
I've been provided with a light inventory for our building and so know what type of light I'm looking for (e.g. 18W F840). I've also found the Philips, GE and Sylvania LEED-EB calculators. What... Last reply: Jenny Carney, Mar 7, 2012, 2:30 pm |
|
How to define "Total Construction Cost" for creditsNC-2009 MRc4: Recycled Contentposted by Mike Maas on Mar 7, 2012, 12:44 pm
I'm looking for clearer guidance on how to calculate the Total Construction Cost". Is this to be the estimated cost of construction, or the actual cost of construction? Last reply: Jennifer Frey, Mar 7, 2012, 1:47 pm |
|
Defining usage groups for tenant scope fixtures.CS-2009 WEp1: Water Use Reductionposted by Luis Miguel Diazgranados on Mar 6, 2012, 4:06 pm
Hi everyone, I'm working on an office building in which efficient bathrooms will be installed as part of the Core and Shell scope. On the other hand, tenants may or may not install... Last reply: Luis Miguel Diazgranados, Mar 7, 2012, 12:50 pm |
|
ASHRAE 90.1 2007 Humidification systemNC-2009 EAc1: Optimize Energy Performanceposted by Ricardo Marques on Mar 5, 2012, 5:52 pm
Hi! In Ashrae 90.1 2007 appendix G, in baseline simulation, what is the system type for humidification? (If the proposed building has humidification) Many thanks Ricardo Last reply: Marcus Sheffer, Mar 7, 2012, 12:12 pm |
|
LPD for space types not listed on ASHRAE TableNC-2009 EAp2: Minimum Energy Performanceposted by Xun Jia on Mar 7, 2012, 10:54 am
Does anyone know how the baseline Lighting Power Density should be set up if the space type is not listed on Table 9.6.1 of ASHRAE 90.1 using Space-by-space method? For example,... Last reply: Marcus Sheffer, Mar 7, 2012, 12:06 pm |
|
Kitchen Hood Exhaust and Make-up AirNC-2009 EAc1: Optimize Energy Performanceposted by Cory Duggin on Mar 6, 2012, 11:28 am
What is the correct way to account for kitchen hood exhaust and the consequential 100% OA makeup energy? This is a commercial kitchen and serving area in a hospital. Thanks in advance. Last reply: Marcus Sheffer, Mar 7, 2012, 11:28 am |
|
Fan Power CalculationNC-2009 EAc1: Optimize Energy Performanceposted by Smart Green on Mar 3, 2012, 1:19 pm
In base case, how to calculate bhp/cfm value for AHUs if we know flow (in CFM) & cooling capacity (btu/h) details? In Design Case, if we know CFM & Power (normal - in kW), how to... Last reply: Marcus Sheffer, Mar 7, 2012, 11:14 am |
|
EPEAT?EBOM-2009 MRc2: Sustainable Purchasing—Durable Goodsposted by American University on Mar 6, 2012, 1:57 pm
I see where... Last reply: Jason Franken, Mar 7, 2012, 9:34 am |
|
How much is the allowance for non-flat?CS-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Gabriela Hernández Castillo on Mar 1, 2012, 3:25 pm
GS-11 on page 13 says that for non-flat topcoat the v.o.c. limit is 100. Is is 100 or 150 (please take a look at the bird's eye view)? Last reply: Mara Baum, Mar 6, 2012, 11:51 am |
