I received a general review comment back on this credit regarding the inclusion of the UPS system in our Energy Star Equipment table.

How have others filled in the ASHRAE Lighting Compliance Documentation form, specifically the "Space-by-Space Method" table?

How does one calculate the required Standby loss for a domestic hot water calorifier.

Could anyone confirm that CI v3 projects registered after 04/08/2016 using the Alternative Compliance Path described in LEED Interpretation 10412 (tenant-level energy simulation) must earn at least

Dear All:- Is there any specific input file available for LEED CI like "Revised input file 1.4" in LEED NC what are the documents we need to submit for EA CR 1.3 & EA PR 02

When listing non-energy star equipment we enter N/A in the Make or model column. This column is also used for Equivalent equipment as well, so the right had part of the form serves two purposes?

I didn't include computers, phones or printers in my documentation, because it was not purchased new for the project, but was reused from the previous location.  I am confused by the response

Hi, Given that only the portions of the building as covered by the tenant’s scope of work need to comply with ANSI/ASHRAE/IESNA Standard 90.1–2007, do we need to document those that are out of the

Does anyone know how stringent is the criteria to achieve compliance with the 6.4.3.1.1 Zone Thermostatic Controls for a Commercial Interiors?

Hi to all: In our project we have a cafeteria (2,000ft2) with the following features: 1. a density of 55 people per 1,000ft2 2. The outdoor airflow (3,600 cfm) is being delivered by an DOAS 3.