To meet this prerequisite, you will need to assess the efficiency of your basic indoor plumbing fixtures, such as faucets, water closets, urinals, and showerheads, and determine how much potable water is consumed relative to a LEED baseline case. If your current bathroom, kitchen and janitorial closet fixtures are already highly efficient, you will probably meet the prerequisite. If your installed fixtures are older and exceed the baseline, you’ll need to modify them.

After having documented your project building's energy performance for EAp2: Minimum Energy Efficiency Performance, EAc1 will require you to focus closely on improving operational performance and, in some cases, upgrading to more efficient equipment. Use your energy audit results from EAp2 to develop your strategy. Identify and implement no-cost and low-cost opportunities to reduce energy consumption, such as changing heating and cooling set points by one or two degrees and reminding occupants to turn off lights and office equipment when not in use.

How energy-efficient is your project building compared with the national average for similar building types? If your project building is already performing well, you may only need to document that performance in order to meet the prerequisite. If your building is relatively inefficient, on the other hand, may have to make operational changes or capital investments to make some improvements. Project teams with underperforming buildings may start by performing an energy audit to identify areas of waste, and the best opportunities for improving efficiency.

More fresh air means healthier buildings. Building on IEQp1: Minimum Indoor Air Quality Performance, this credit calls for exceeding by 30% the minimum outside air requirements set by ASHRAE 62.1-2007. Our indoor environments are burdened by carbon dioxide produced by occupants and by off-gassing of construction materials and furnishings. These conditions can cause fatigue and contribute to occupant health problems. Increased ventilation is one way to mitigate these problems.

More fresh air means healthier buildings. Building on IEQp1: Minimum Indoor Air Quality Performance, this credit calls for exceeding by 30% the minimum outside air requirements set by ASHRAE 62.1-2007. This credit applies only to occupied spaces of the building unlike EQp1, which applies to all the rooms as per by ASHRAE 62.1. This increased ventilation helps reduce concentrations of carbon dioxide produced by occupants, and pollutants produced by off-gassing of construction materials and furnishings.