Hello! I´m documenting a floor that is FSC MIX, does it means that I can count it as 100%? I´m not sure because the label only says MIX, not FSC Mixed Credit, neither FSC Mixed (NN)%. Thanks in

The client has stated an FTE of 24 for the building as 24 reflects current staff and all that the departmental operational budget can accommodate.

WE are working on a LEED ND project and are currently incorporating the LEED requirements in the project specifications.

Our project includes an existing (more than three years old) DES that serves both the process equipment and building htg/clg loads.

Let's Say this building is 26,000 sf which the baseline is system 5-6. What if the exception area is 10,000 sf (process load difference >10 Btu/h ft).

We have a college building with around 50% of its floor area being a gym, which is sized to its maximum capacity during graduation.

I have a query on ASHRAE 90.1 2010. There are 2 paths to specify the chiller COP. How do we enter the part load values in the simulation software? ASHRAE only mentions the IPLV.

Is there any feature in LEED online to lock the credits not to be changed by other team members ?

Should a cleaner used before the adhesive (to make the Surface clean) fullfill IEQc4.1? If it should which category should be used?

Hi, I filed two exemplary performance credit under the same Innovation in design in case one fails.