Dear Leed users, We are doing a warehouse project in Spain.

I'm using this credit for an Innovation in Design point for a new building/major renovation.

Under Version 3 is was acceptable to retain storm water run-off in tanks to discharge in to storm water sewers at a later date, is this still acceptable under V4?

We understand that a swimming pool itself does not contribute,and we have been told we can exclude the pool from the calculations. Can we include the pool deck area itself?

Hello, Is it okay to install one airflow measurment device within an outdoor air intake that serves multiple AHUs or does each AHU need to have its own airflow measurement device? Thanks!

Hi Everyone, here's another question. The campus guidance from the LEED Canada Reference Guide states the following: " It is acceptable to achieve a Campus Shared Infrastructure compliance path

Greetings, The following issue is somehow not clear and any support is highly appreciated. The project belongs to system 7 (LEEDv2009) and has to be modeled with one AHU system per floor.

Dear all, I am targeting the Daylight credit by modelling based on Option 2. However, the simulation results show that the illuminance level over the threshold (3,000 lux).

The contractor on our project has established a weighing station for trucks and vehicles within the project boundary and is planning to use it to measure the amount of diverted waste for MRc2.

Does anyone know if there are definitions for the different irrigation types? Especially the differences between the two drip types would be of interested. Thanks, Jens